KyleGP
May 4, 02:06 AM
I agree.
I was going to send it to him today then it hit my gut and I thought logically.
So I went back and said change of plans, I want to do the exchange with my friend.
What's funny is since I told him that I'd like to do the exchange with my friend in person again, he hasn't responded. If he doesn't respond from this point on, I think I made the best decision of the century, because it was obviously a scam.
I was going to send it to him today then it hit my gut and I thought logically.
So I went back and said change of plans, I want to do the exchange with my friend.
What's funny is since I told him that I'd like to do the exchange with my friend in person again, he hasn't responded. If he doesn't respond from this point on, I think I made the best decision of the century, because it was obviously a scam.
wilywampa
May 3, 02:37 PM
I believe your macbook uses ddr2 memory,whereas the newer MBP's use DDR3. There is difference in voltage requirements for those two standards. You can install it in the macbook, it just won't boot, but you won't damage anything.
Why are you trying to do this in the first place?
This page (http://support.apple.com/kb/ht1270#link5) says the Late 2008 15" MBP uses DDR3 memory. I will check for sure when I get home today by looking at "About this Mac." As I said in the original post, I am doing this because I am upgrading the RAM in the new MBP as soon as it's delivered, and upgrading the RAM in the old MBP should get me more $$$ when I sell it. Thanks for the help, everyone.
Why are you trying to do this in the first place?
This page (http://support.apple.com/kb/ht1270#link5) says the Late 2008 15" MBP uses DDR3 memory. I will check for sure when I get home today by looking at "About this Mac." As I said in the original post, I am doing this because I am upgrading the RAM in the new MBP as soon as it's delivered, and upgrading the RAM in the old MBP should get me more $$$ when I sell it. Thanks for the help, everyone.
stewacide
Sep 29, 01:56 AM
Anyone else notices that iWork will only update if the apps' are in Applications/iWork 06? That's poor design / very un-Apple: why can't I put my apps where I like?
warcraftmaster
Jun 15, 12:51 AM
can't wait to get mine up am going to get like 20,000+ users(i know it will happen).i bet you will ever sign up for mine :) .i will get it up in later this year.
more...
Pine Pienaar
Oct 20, 02:07 AM
Just less than 1MB for me.
I like updates for Mac OS X.
I thought that Mac OS is immune to security threats?
I like updates for Mac OS X.
I thought that Mac OS is immune to security threats?
alphaod
Apr 25, 10:01 PM
If you have to ask, you don't need it; if you need it, you either wish you had it or already have it.
more...
bellis1
Feb 4, 03:34 PM
I just had to post to tell everyone how much I love this thing. How can anyone live with a one button mouse?
I has three buttones on the left side of the mouse for your thumb. I have these set for one to go forward/next/page down and one to go backward/previous/page up and then the middle one to flip between pages that are open within one application. Makes browsing macrumors and multiple threads fast especially with the scroll wheel on the top.
And then you can click the scroll whell, I have that programed for expose to only show the desktop.
And then wait, still two more buttons. One of the buttons on the scroll wheel I have programmed to expose all windows and the other to show all the windows in one application. What is that like 6 buttons?
Shawn Robinson
more...
Shaun Robinson | Access
quot;Kinetic can crusher eue
more...
Ernest Robinson Frank Robinson
tagged with wiki hungup
more...
Piccioni amp; Shawn Robinson
Shaun Alexander – Wikipedia
more...
http://en.wikipedia.org/wiki/
Missy Robinson
more...
Jackie Robinson#39;s life was
Shawn Robinson at Evri.com
Denise Robinson
Reacent Post
I has three buttones on the left side of the mouse for your thumb. I have these set for one to go forward/next/page down and one to go backward/previous/page up and then the middle one to flip between pages that are open within one application. Makes browsing macrumors and multiple threads fast especially with the scroll wheel on the top.
And then you can click the scroll whell, I have that programed for expose to only show the desktop.
And then wait, still two more buttons. One of the buttons on the scroll wheel I have programmed to expose all windows and the other to show all the windows in one application. What is that like 6 buttons?
emw
Aug 13, 02:12 PM
why has nobody ever replied to this???
Unfortunately, on busy days sometimes posts get lost, like this one probably did.
However - congratulations to 18thTomorrow on one of the lowest cost switching stories I've heard. A G3 with monitor for $150? Sweet.
Unfortunately, on busy days sometimes posts get lost, like this one probably did.
However - congratulations to 18thTomorrow on one of the lowest cost switching stories I've heard. A G3 with monitor for $150? Sweet.
more...
thomwilk
Mar 24, 11:44 AM
Rideau Centre Apple Store for me. Anybody want to meet up?
Sure, I'll meet you. When are you going?
Sure, I'll meet you. When are you going?
Much Ado
Jan 14, 12:37 PM
NYC man! ..........thats new york city for those who need help figuring it out. :D
Then you might get to see it by the end of the day. It varies. For us in the UK, we'll most likely have to wait till Wednesday.
Then you might get to see it by the end of the day. It varies. For us in the UK, we'll most likely have to wait till Wednesday.
more...
seubjoh
Mar 23, 12:32 PM
Ya Im having trouble finding a base install thats not an update. Any help? Thanks for the speedy responses guys I appreciate it
drenline
Apr 16, 09:11 PM
Noooo! Say it ain't so!! Im still waiting on my iPad 2 jailbreak to try this out!
more...
celticpride678
Apr 24, 10:05 AM
are you 100% sure about this?? just asking cuz there are times where i wanna charge my phone but its like 5 min before i wanna go to bed and dont wanna charge it for 8 hours . and its always rumored that leaving your charger on overnight will hurt the battery. thats the last thing i wanna do on an iphone since the battery is non removable
Yep, basically every Apple product does this.
Thanks, if you don't mind, I do have one last question. I have been trying to figure out if when I turn my phone off all the way, will it charge so I have turned it on and off a few times. Is this in any way bad for my battery or phone? Thanks :D
Confused. Turning the phone off and on again?
Yep, basically every Apple product does this.
Thanks, if you don't mind, I do have one last question. I have been trying to figure out if when I turn my phone off all the way, will it charge so I have turned it on and off a few times. Is this in any way bad for my battery or phone? Thanks :D
Confused. Turning the phone off and on again?
i4k20c
Apr 22, 01:52 AM
Hello,
I have a brand new 16gb iphone. I will probably change this to FS or list it on ebay if i cannot deal with local buyers, but for now, i'd rather sell it locally since I will be in downtown chicago till the second midweek of may.
Let me know if anyone has any interest, and how much they'd like to buy it for. :)
Also post any questions, and if they are requested, pictures will be posted.
thank you. :)
I have a brand new 16gb iphone. I will probably change this to FS or list it on ebay if i cannot deal with local buyers, but for now, i'd rather sell it locally since I will be in downtown chicago till the second midweek of may.
Let me know if anyone has any interest, and how much they'd like to buy it for. :)
Also post any questions, and if they are requested, pictures will be posted.
thank you. :)
more...
Nameci
Apr 19, 01:18 PM
If I were you i would try to strip memory, or reseat memory on the slot.
dlee96
May 2, 12:53 PM
With the plastic clips, the springs were required to maintain pressure between the heatsink and the CPU. You don't need the springs if you're using screws and nuts. I used nylon screws and nylon lock nuts. I see temps a few degrees lower than yours while encoding. Remember not to use too much thermal paste.
I've recently installed a 2.33ghz c2d chip in my old 1.66 cd mac mini. The performance boost has been great!
I've noticed temps have gotten a little high while running encodes and such... around low - mid 90s C while handbrake is encoding. I know this is still within operating temperature, but i'd like them to be a little lower.
I managed to keep the plastic clips from breaking while installing my cpu. I've been thinking about replacing the nylon clips with some nylon screws, like others have mentioned.
My question, Do people use the springs that came with the clips when installing the screws? Or do people just screw the heatsink down snug to the cpu without the springs?
Thanks,
I've recently installed a 2.33ghz c2d chip in my old 1.66 cd mac mini. The performance boost has been great!
I've noticed temps have gotten a little high while running encodes and such... around low - mid 90s C while handbrake is encoding. I know this is still within operating temperature, but i'd like them to be a little lower.
I managed to keep the plastic clips from breaking while installing my cpu. I've been thinking about replacing the nylon clips with some nylon screws, like others have mentioned.
My question, Do people use the springs that came with the clips when installing the screws? Or do people just screw the heatsink down snug to the cpu without the springs?
Thanks,
more...
webznz
Apr 18, 06:14 PM
sorry, basically I'm trying to initiate a connection to my server in application:didFinishLaunchingWithOptions: this is to instantiate my cookie that im using to sync devices to my app, if someone gives out their register code then their device will be bounced off my server when the new device with their reg code syncs... thus not allowing them to make queries to the database.., if there is no response then connection:didFailWithError: will catch the fail error and the action sheet should pop up on the main screen.
Thanks for the hep will have another look at my code with your response in mind.
EDIT:
so found a solution in some sample code refereed from in the reference documentation.
it was as easy as swapping
[actionSheet showInView:[UIApplication mainWindow]]
with
[actionSheet showInView:self.window];
I also realized that i was calling the wrong name for the window as it was initialized as window in my .h file not mainWindow... think i need a nap .. :)
Thanks for the hep will have another look at my code with your response in mind.
EDIT:
so found a solution in some sample code refereed from in the reference documentation.
it was as easy as swapping
[actionSheet showInView:[UIApplication mainWindow]]
with
[actionSheet showInView:self.window];
I also realized that i was calling the wrong name for the window as it was initialized as window in my .h file not mainWindow... think i need a nap .. :)
iAmYou
May 1, 06:42 PM
Now that I have a great new white iPhone 4, I'm taking a wait and see approach.
It has nothing to do with the color, but rather how great this new model is.
Normally I trust Apple and pre order the moment they release each new iPhone. But after getting burned with Antennagate, I'm not taking the risk.
Another shocker is how many improvements the new white iP4 has. It's far and away the best of all smartphones.
The performance as a phone is wonderful. Loud and clear, it doesn't drop calls. So now that I have a great iPhone there's no reason to get iPhone 5.
I'm going to enjoy this one till iPhone 6.
You keep posting this drivel.
This is not a new iPhone only a new color.
There is nothing any more spectacular about it.
We black iPhone users have been using it for 10 months now.
It has nothing to do with the color, but rather how great this new model is.
Normally I trust Apple and pre order the moment they release each new iPhone. But after getting burned with Antennagate, I'm not taking the risk.
Another shocker is how many improvements the new white iP4 has. It's far and away the best of all smartphones.
The performance as a phone is wonderful. Loud and clear, it doesn't drop calls. So now that I have a great iPhone there's no reason to get iPhone 5.
I'm going to enjoy this one till iPhone 6.
You keep posting this drivel.
This is not a new iPhone only a new color.
There is nothing any more spectacular about it.
We black iPhone users have been using it for 10 months now.
FriarCrazy
Aug 5, 04:25 PM
That was just about the coolest thing I've ever seen. I saw a guy that put a linux box in his car... This totally blows him away. Wow.
discounteggroll
Apr 29, 08:39 AM
was there a network change made at either locations of the computers? some routers do not support what is required for shared files and back to my mac
~Shard~
Dec 24, 12:52 AM
Very nice - this was overdue and definitely needed. I guess Apple is getting everything in order for all the new products they'll be unleashing in the upcoming months. Here's hoping the QC department at Apple didn't fall asleep though, so that these pages won't actually be required that often. If they are, Jobs will not be pleased... :eek: ;) :D
Legion93
Apr 22, 05:01 PM
When I buy RAM for my Macs, I buy Crucial, cheap, reliable and high-quality. Apple uses mostly cheap Korean brand 'Hynix' memory modules in their Macs and they are quite unreliable. Can't speak for OWC though...
Dagless
Feb 6, 03:17 AM
i bought myself an Logitech V500 a few months back to accompany my future Powerbook. apart from the wireless USB thing its perfect. but its sooo small and i think it has the highest DPI for any infrared mouse too, but dont quote me on that (and that was back in october).
ive had it since october, use it every single day for an hour approx and the battery is still in 'good' rating! i never knew wireless mice were so battery-friendly. man i bought 8 AAA batteries expecting it to eat through them but at this rate these will last me till a G5 PB ;)
logitech are very good with mice. kudos to them
oh and subl1me; its an amazing mouse, probably wouldnt use it for desktop PC/Mac use but for portables... yea... highly recommended.
ive had it since october, use it every single day for an hour approx and the battery is still in 'good' rating! i never knew wireless mice were so battery-friendly. man i bought 8 AAA batteries expecting it to eat through them but at this rate these will last me till a G5 PB ;)
logitech are very good with mice. kudos to them
oh and subl1me; its an amazing mouse, probably wouldnt use it for desktop PC/Mac use but for portables... yea... highly recommended.
Snesley Wipes
Mar 30, 10:14 PM
I did 50GB. I only play CS and TF2 though... only using 25GB for those with OS, etc...
0 comments:
Post a Comment