DeaconGraves
May 4, 11:00 PM
thank you soo much dude!!
oh, will this erase anything?
and do u no how i can get snow leopard back?
No, that will not erase everything, but what it will hopefully do is direct your computer to your startup disk so you will get back into Lion to do what you need (maybe back everything up?)
The re-install snow leopard insert your DVD, then restart the computer. Hold down the option bottom when you here the chimes and hold it until your boot options appear. One of them will be the DVD. Select it and wait for the installer to load (it may take a while). But honestly, get your paper done first and worry about that tomorrow.
oh, will this erase anything?
and do u no how i can get snow leopard back?
No, that will not erase everything, but what it will hopefully do is direct your computer to your startup disk so you will get back into Lion to do what you need (maybe back everything up?)
The re-install snow leopard insert your DVD, then restart the computer. Hold down the option bottom when you here the chimes and hold it until your boot options appear. One of them will be the DVD. Select it and wait for the installer to load (it may take a while). But honestly, get your paper done first and worry about that tomorrow.
Nugget
Oct 19, 08:22 PM
I'll be with you in spirit....
http://macnugget.org/albums/japan2004/IMG_2338.thumb.jpg (http://macnugget.org/photos/japan2004/IMG_2338)
...from Texas USA.
http://macnugget.org/albums/japan2004/IMG_2338.thumb.jpg (http://macnugget.org/photos/japan2004/IMG_2338)
...from Texas USA.
bedifferent
May 6, 05:17 PM
It just looks prettier.
Exactly. Fine tuned for the new Joe-sumer iOS market, but nothing mind blowing for us Prosumers.
Exactly. Fine tuned for the new Joe-sumer iOS market, but nothing mind blowing for us Prosumers.
gguerini
May 4, 09:27 AM
I just installed the Intel 320 (120 GB) and I must say that I'm amazed.. No set-up besides the TRIMenabler patch
I'm going to install my brand new Intel 320 (120GB) tonight. Should I "zero out" before I install the MacOS? Should I enable TRIM support??
Thanks
I'm going to install my brand new Intel 320 (120GB) tonight. Should I "zero out" before I install the MacOS? Should I enable TRIM support??
Thanks
more...
dobbin
Oct 17, 04:32 AM
This is indeed a well known issue with cubes. Some people were affected immediately, and others only after a period of time like you.
My cube has a 'seizure' about once every 4 months and it will do this for an hour or two and then correct itself and be fine again.
There have been numerous causes and solutions suggested and it appears that different things work for different machines.
The usual cause is the proximity switch - the touch sensitive one on top of the cube. Most people report that the switching on and off is caused by a badly fitting or loose gasket around this switch inside the cube.
Some people say that making sure this gasket is seated firmly will cure the problem, and others have had this replaced (for free) by Apple.
I have never found this to be the case with mine, it just seems to have a mind of its own, for short spells every now and again.
Some people have also reported that this happens on hot days or when the air-con is swithed off. I've not noticed this (as I live in the UK it never gets hot!).
There have been hundreds of discussions on this topic since the cube was introduced and you can probably find some useful info on the web.
I'm not sure why Apple have not provided more help on this topic given what a widespread issue it was/is, but I just searched Google for "Apple Cube Switch problem" and it came back with a lot of links. Bear in mind that the solution for one cube may not help yours! I guess this is the price we have to pay for having the coolest computer the world has ever seen :D
Cheers,
Dobbin
My cube has a 'seizure' about once every 4 months and it will do this for an hour or two and then correct itself and be fine again.
There have been numerous causes and solutions suggested and it appears that different things work for different machines.
The usual cause is the proximity switch - the touch sensitive one on top of the cube. Most people report that the switching on and off is caused by a badly fitting or loose gasket around this switch inside the cube.
Some people say that making sure this gasket is seated firmly will cure the problem, and others have had this replaced (for free) by Apple.
I have never found this to be the case with mine, it just seems to have a mind of its own, for short spells every now and again.
Some people have also reported that this happens on hot days or when the air-con is swithed off. I've not noticed this (as I live in the UK it never gets hot!).
There have been hundreds of discussions on this topic since the cube was introduced and you can probably find some useful info on the web.
I'm not sure why Apple have not provided more help on this topic given what a widespread issue it was/is, but I just searched Google for "Apple Cube Switch problem" and it came back with a lot of links. Bear in mind that the solution for one cube may not help yours! I guess this is the price we have to pay for having the coolest computer the world has ever seen :D
Cheers,
Dobbin
mddharma
Sep 19, 08:36 PM
Also, what is the difference between these two 17" displays as shown on cnet?
http://shopper-search.cnet.com/search?qt=apple+studio+display&subj=apple_studio_display&part=google-cnet&tag=3785 :confused:
http://shopper-search.cnet.com/search?qt=apple+studio+display&subj=apple_studio_display&part=google-cnet&tag=3785 :confused:
more...
olternaut
Jan 14, 11:14 AM
I've commanded my boss and my co-workers to not surf any news sites or listen to any radio stations till after I get home and I watch they keynote. They have decided to comply because they do not want to face my wrath!!! :mad:
p.s. I'm half tempted to extend my commandment an extra day til Apple posts the high res version at that!!
p.s. I'm half tempted to extend my commandment an extra day til Apple posts the high res version at that!!
Cole JM
Mar 18, 09:30 PM
i was thinking of applying but im so unsure....would it be a good part-time job for a 17 year old?
I believe you have to be 18 to work in an apple store, I may be wrong. maybe that is just my local store
I believe you have to be 18 to work in an apple store, I may be wrong. maybe that is just my local store
more...
jessica.
May 6, 08:37 AM
Was this supposed to be posted on facebook?
Have fun on your vaca ... LIKE! :p
Have fun on your vaca ... LIKE! :p
notjustjay
Apr 18, 12:17 AM
Call me old fashioned, but there's something about paper that I still prefer over eBooks in many situations. One advantage is you can glance at large portions of the document at the same time (by flipping around and skimming) and you can even separate a printed document and compare things side by side if needed. You can also highlight, underline, and take notes on the page.
I find myself using both on a day to day basis (well, not eBooks per se, but PDF versions of documents). I'll print out a software design document, for example, which describes in detail the stuff I'm programming or working on, for the reasons I mentioned above -- it's very handy to be able to circle something or jot down notes. On the other hand, there are a few reference documents I use on a regular basis and I like to pull up the PDF and search for specific terms.
I find myself using both on a day to day basis (well, not eBooks per se, but PDF versions of documents). I'll print out a software design document, for example, which describes in detail the stuff I'm programming or working on, for the reasons I mentioned above -- it's very handy to be able to circle something or jot down notes. On the other hand, there are a few reference documents I use on a regular basis and I like to pull up the PDF and search for specific terms.
more...
LimeiBook86
Mar 30, 05:25 PM
The PC version is only $29 so the Mac version will be the same. The console version is $39 but it's still an ok price. This game is wonderful. I downloaded the demo and played it on my PC and it played like a dream.
After you complete a level you have a 'free-play' mode where you can change into different characters and walk around. It's fun being an enemy droid and sneaking past the bad guys without them knowing.
If you haven't seen screenshots or the trailer for the game I say you should look at them before you judge the game itself. At first I didn't know what to think, but after looking at the screenshots and videos I downloaded the demo right away! Heck I even submitted this story and reserved a copy of the game myself! :)
Game Info, Screenshots, and Trailers:
http://www.legostarwarsthevideogame.com/flash/player.cfm
http://www.lego.com/eng/starwars/videogame/default.asp
I can't wait to play the full version tomorrow. :D
EDIT: Here's a screen from 3Dgamers.com, yeah it looks much better when all the settings are on high though:
http://images.3dgamers.com/screenimages/games/legostarwars/lsw146.jpg
After you complete a level you have a 'free-play' mode where you can change into different characters and walk around. It's fun being an enemy droid and sneaking past the bad guys without them knowing.
If you haven't seen screenshots or the trailer for the game I say you should look at them before you judge the game itself. At first I didn't know what to think, but after looking at the screenshots and videos I downloaded the demo right away! Heck I even submitted this story and reserved a copy of the game myself! :)
Game Info, Screenshots, and Trailers:
http://www.legostarwarsthevideogame.com/flash/player.cfm
http://www.lego.com/eng/starwars/videogame/default.asp
I can't wait to play the full version tomorrow. :D
EDIT: Here's a screen from 3Dgamers.com, yeah it looks much better when all the settings are on high though:
http://images.3dgamers.com/screenimages/games/legostarwars/lsw146.jpg
britboy
Jul 6, 09:36 PM
Heh, you really are turning into the old man of macrumors there jef ;) I agree though. It's a shame those you listed (and omitted) were either too contentious for others to handle, or lost interest due to one reason or another. There's so many new members now that it's hard to get to know anyone like in the early days of MR.
Then again, you could always become a demi. Things get a lot more personal in there ;)
Then again, you could always become a demi. Things get a lot more personal in there ;)
more...
edesignuk
Dec 29, 03:42 PM
Even if you look at some donation programs run by major business, 3% is still quite low. Some of them are so poorly run that they may only have 3% getting to the people that need it.
If you donate directly to the organizations involved (Red Cross etc) I can't imagine they'll be taking a cut...can they??
If you donate directly to the organizations involved (Red Cross etc) I can't imagine they'll be taking a cut...can they??
poobear
May 6, 11:54 AM
* Full screen mode: A good idea that works very well if you have small screens or/and resolution. On my ACD I have so much space that for most apps, full screen mode is an overkill. I don't see me using it a lot. Maybe when Aperture gets it I will use it.
Are you saying that you are not impressed by this feature just because it doesn't fit YOUR need, even though you emphasize that it works very well if you have a small screen (most Mac users have the laptop)?
Is anyone running Lion on a lower-powered machine? I'd like to hear feedback on those who have tried it on an 11" MBA.
Runs smooth as butter on my 11" 2GB machine.
Are you saying that you are not impressed by this feature just because it doesn't fit YOUR need, even though you emphasize that it works very well if you have a small screen (most Mac users have the laptop)?
Is anyone running Lion on a lower-powered machine? I'd like to hear feedback on those who have tried it on an 11" MBA.
Runs smooth as butter on my 11" 2GB machine.
more...
MikeDTyke
Feb 24, 09:24 AM
NAS noob question now.
how do you transfer files between folders and drives etc?
i think thats whats putting me off is ease of file management
Ooh thats an interesting question, that you would think simple to answer. NOT!
So lets say you have the NAS with 4 internal drives and say an external off usb.
The 4 drives will typically be in an array, so one protected filesystem. Off this you can have one or more network shares using this one filesystem, each can be restricted user/pc access and can have a usage limit set.
External drives are seperate filesystems so a network share would normally need to be set up to show the contents of the external on the network.
So we end up with something like:
Internal 4 drives = Filesystem 1 = Network share 1
External 1 drive = Filesystem 2 = Network share 2
So say you had a file on the external and you needed it on Filesystem 1?
Option1: mount both network shares from your PC and copy from 2 to 1. SlOW
Option2: SSH onto the NAS (It's just a linux server) and type cp /filesystem2/filename /filesystem1 (Eveything is copied locally on the NAS, you're well l33t now)
Option3: SSH onto the NAS and create a softlink connecting the external drive as a folder under Filesystem1. ie. ln -s /filesystem2 /filesystem1/External (External drive will appear as a folder under the Network share 1 , now you are super l33t, proceed to IT godlyness)
Option4: Setup RTRR (real time rsync replication) the qnap NAS' can have jobs set up to replicate between filesystems. (Not as l33t, but everything is duplicated nicely)
3 Means that everything will appear under 1 big filesystem. 4 means you do it once and then never repeat it. Moving files under 1 or 3 from a pc will result in a lot of network traffic. :cool:
how do you transfer files between folders and drives etc?
i think thats whats putting me off is ease of file management
Ooh thats an interesting question, that you would think simple to answer. NOT!
So lets say you have the NAS with 4 internal drives and say an external off usb.
The 4 drives will typically be in an array, so one protected filesystem. Off this you can have one or more network shares using this one filesystem, each can be restricted user/pc access and can have a usage limit set.
External drives are seperate filesystems so a network share would normally need to be set up to show the contents of the external on the network.
So we end up with something like:
Internal 4 drives = Filesystem 1 = Network share 1
External 1 drive = Filesystem 2 = Network share 2
So say you had a file on the external and you needed it on Filesystem 1?
Option1: mount both network shares from your PC and copy from 2 to 1. SlOW
Option2: SSH onto the NAS (It's just a linux server) and type cp /filesystem2/filename /filesystem1 (Eveything is copied locally on the NAS, you're well l33t now)
Option3: SSH onto the NAS and create a softlink connecting the external drive as a folder under Filesystem1. ie. ln -s /filesystem2 /filesystem1/External (External drive will appear as a folder under the Network share 1 , now you are super l33t, proceed to IT godlyness)
Option4: Setup RTRR (real time rsync replication) the qnap NAS' can have jobs set up to replicate between filesystems. (Not as l33t, but everything is duplicated nicely)
3 Means that everything will appear under 1 big filesystem. 4 means you do it once and then never repeat it. Moving files under 1 or 3 from a pc will result in a lot of network traffic. :cool:
kevin2223
May 4, 12:05 AM
There is a minor difference - the new iMacs have an ambient light sensor which will provide ideal brightness whether you are in a dark or well-lit environment.
If you manually set the brightness, does it return? Perhaps the display was set too bright/dim for the conditions?
From Apple's site: "To conserve power and relieve eyestrain, a built-in ambient light sensor automatically adjusts the screen brightness on MacBook, MacBook Pro and iMac to suit the ambient light of whatever room you�re in."
If you manually set the brightness, does it return? Perhaps the display was set too bright/dim for the conditions?
From Apple's site: "To conserve power and relieve eyestrain, a built-in ambient light sensor automatically adjusts the screen brightness on MacBook, MacBook Pro and iMac to suit the ambient light of whatever room you�re in."
more...
MarximusMG
Feb 12, 10:28 AM
Yes. Yes you are.
iTunes-Luv
Apr 15, 09:13 AM
Nicely done.
Wondering if you can make an angry bird version, something like this.
Will be a special gift this Xmas
http://www.buyfrompowerseller.com/product_images/uploaded_images/macbook-angry-bird-leather-case-cover.jpg
Wondering if you can make an angry bird version, something like this.
Will be a special gift this Xmas
http://www.buyfrompowerseller.com/product_images/uploaded_images/macbook-angry-bird-leather-case-cover.jpg
MP4-22
Mar 31, 08:51 PM
I usually end up getting the third version like yellow, crystal, and emerald. I have to get me a DS first.
marykay9507
Feb 2, 07:31 PM
can't you just unlock and use that one? i don't know much about hacking and stuff, but wouldn't that make sense rather than getting a 4gb?
Isoparm
Mar 3, 07:50 PM
I'm trying to forward requests from one port to another and running into problems.
I have a Mac Server (10.5) and a number of Mac clients. I want requests going to one of my clients for port 80 (192.168.1.20:80), to go instead to port 10080 (192.168.1.20:10080).
I've tried everything I can but I can't seem to get this to work. Here's what I've done:
I've added this to my ipfw.conf file:
add 100 fwd 192.168.1.20,80 ip from any to 192.168.1.20 dst-port 10080
But that didn't seem to work.
I also tried to add the correct info the my natd.conf.apple file.
natd.conf.apple:
interface en0
natportmap_interface en1
dynamic yes
log yes
log_denied no
deny_incoming no
use_sockets yes
same_ports yes
unregistered_only yes
reverse no
proxy_only no
clamp_mss yes
redirect_port tcp 192.168.1.20:80 192.168.1.20:10080
I stop and restart both NAT and Firewall from the Server Admin.
Only other thing I can figure is that I've got two NIC's in the server (en1 & en0) en1 is where all the clients are and the 192.168.1.xxx IP addresses. But en0 is the direct connection to the internet. So is it possible that my port forwarding is working, but on the wrong interface?
Is there something I'm doing wrong here?
Any help would be greatly appreciated. Thanks in advance.
I have a Mac Server (10.5) and a number of Mac clients. I want requests going to one of my clients for port 80 (192.168.1.20:80), to go instead to port 10080 (192.168.1.20:10080).
I've tried everything I can but I can't seem to get this to work. Here's what I've done:
I've added this to my ipfw.conf file:
add 100 fwd 192.168.1.20,80 ip from any to 192.168.1.20 dst-port 10080
But that didn't seem to work.
I also tried to add the correct info the my natd.conf.apple file.
natd.conf.apple:
interface en0
natportmap_interface en1
dynamic yes
log yes
log_denied no
deny_incoming no
use_sockets yes
same_ports yes
unregistered_only yes
reverse no
proxy_only no
clamp_mss yes
redirect_port tcp 192.168.1.20:80 192.168.1.20:10080
I stop and restart both NAT and Firewall from the Server Admin.
Only other thing I can figure is that I've got two NIC's in the server (en1 & en0) en1 is where all the clients are and the 192.168.1.xxx IP addresses. But en0 is the direct connection to the internet. So is it possible that my port forwarding is working, but on the wrong interface?
Is there something I'm doing wrong here?
Any help would be greatly appreciated. Thanks in advance.
DaiKirai
Feb 16, 01:13 PM
For Firefox, is there a reason you're using Tabbrowser Extensions and not Tabbrowser Preferences?
KittenKrusher
Sep 21, 12:22 AM
I was looking to get the Sony DSC-W7 camera mainly because my friend has the 5 MP version and I find it very nice, with its large screen and all. I can the the W7 for about $340 which I think is a good price.
My question is can anyone recommend a better camera in the 7 MP range that might be a better camera? The most I would spend is $400. and should I get a camera that can support RAW images, because this W7 one does JPG and not RAW.
My question is can anyone recommend a better camera in the 7 MP range that might be a better camera? The most I would spend is $400. and should I get a camera that can support RAW images, because this W7 one does JPG and not RAW.
Icaras
May 5, 02:47 AM
I highly doubt Steve will announce another iMac at WWDC. :eek:
I'm sure he's talking about Lion announcements at WWDC, most importantly the release date and price.
Anyway, $50 is worth waiting a month or two for me. But then again, I'm in no rush.
I'm sure he's talking about Lion announcements at WWDC, most importantly the release date and price.
Anyway, $50 is worth waiting a month or two for me. But then again, I'm in no rush.
0 comments:
Post a Comment