taylorwilsdon
Mar 18, 11:06 PM
Did you already have an iPhone that you then used the packaging from for this refurb?
Yes I'm putting it into one of the "official" boxes instead of the dreary brown ones they give you. Figure I might as well dress it up :)
For all purposes it appears to be brand new, but I put refurb just to be honest.
Currently at $275 on ebay. Get your bids in early!
Yes I'm putting it into one of the "official" boxes instead of the dreary brown ones they give you. Figure I might as well dress it up :)
For all purposes it appears to be brand new, but I put refurb just to be honest.
Currently at $275 on ebay. Get your bids in early!
someguy
Jan 12, 09:38 AM
I do have an idea which could help Apple. If they want to hear it they can email me.
What is your opinion on Cisco and Apple's dispute?
I'm sure they are dying to hear your plan.
I say may the best man (company) win. To be honest, and this is just opinion, I think Cisco threw the "iPhone" out there because they knew the real iPhone was coming (as did we all) and wanted to bank on it somehow, just like I'm sure iPhone-related email addresses were swiped up recently too.
I could be wrong, but prove it.
What is your opinion on Cisco and Apple's dispute?
I'm sure they are dying to hear your plan.
I say may the best man (company) win. To be honest, and this is just opinion, I think Cisco threw the "iPhone" out there because they knew the real iPhone was coming (as did we all) and wanted to bank on it somehow, just like I'm sure iPhone-related email addresses were swiped up recently too.
I could be wrong, but prove it.
TEG
Dec 6, 03:08 PM
I have never had a problem with Myspace in Safari. I have always had WMP installed, and I do get errors with WMP10 playlists. I'm also running on an TiBook 500, so if you are still having problems, I suggest installing WMP9, and resetting Safari.
TEG
TEG
ergdegdeg
Mar 29, 04:02 PM
It's called text figures (http://en.wikipedia.org/wiki/Text_figures). They are used to make numbers integrate better with text.
more...
Rincewind42
Jan 11, 09:08 PM
Hmm... After it's done with the first CD, and it's rebooting, the CD is still in there, right? I believe that the mac continues to boot off the first CD until the second is needed. The HD isn't booted from until the installation has finished. Once it's done with the first CD, and restarts, try holding down the "C" key to ensure it doesn't try and boot from the HD.
Actually, after the first CD is done installing, the installer boots from the internal HD (or at least, it should). The installer then continues pulling from the CD to finish the installation (if there is more needed, you actually don't need the 2nd CD for a fully functional system).
You can try doing a custom install with only the minimal install features and see if you can at least get a bootable system. Then you can do additional installs from the 2nd CD directly from the Finder, you just have to navigate to the packages that you want to install.
Actually, after the first CD is done installing, the installer boots from the internal HD (or at least, it should). The installer then continues pulling from the CD to finish the installation (if there is more needed, you actually don't need the 2nd CD for a fully functional system).
You can try doing a custom install with only the minimal install features and see if you can at least get a bootable system. Then you can do additional installs from the 2nd CD directly from the Finder, you just have to navigate to the packages that you want to install.
blackwind
Apr 19, 09:21 PM
I would have called it iPad HD
more...
dotdotdot
Mar 20, 02:40 PM
Well, If you own 2 keyboards and 2 mice then why don't you check to see if your monitor already supports 2 computers and that will save you money?
lkirkup
Mar 24, 10:33 AM
Hi All...
I was hoping for some help and guidance. I've been a network engineer for 15 years now. All of my experience is in the Microsoft arena. Lately, my organization has been adopting MAC / Apple products ( iPad, iPhones, etc. ) but we've now gone as far as to purchase our first MAC desktop system, an iMAC.
Having no formal training in administering an iMAC in a Windows AD Domain ( 2008 ) I've been scouring the internet ( Google ) looking for as much information as I can. So far, I've been able to integrate it into our AD Domain and have network users login and have access to their network home directories.
I am, however, suffering in a couple of areas and was hoping that I could get some real world advice on the following:
1) What is the best way for me to administer this computer remotely using my Windows 7 Pro workstation? Example: Remotely connecting to it for help desk and other needs. Currently I use Dameware NT Utilities to remotely connect and administer my PC based workstations. Is there a similar utility for iMAC's that will run on Windows 7?
2) Login scripts... How am I able to accomplish this on a MAC? My PC based workstations use a batch file to map network drives and other things needed at login.
3) What is the best way for me to be able to control the iMAC through Group Policies? Or maybe I should be asking if this is even possible?
I appreciate in advance for any help your able to give! :)
2) Use Automator to create an application and have it run at login.
specifically to mount network drives use "get specified servers"
and add servers as smb://xxx.xxx.xxx.xxx/mountfolder add as many as you need.
Then use "Connect to servers"
Save as an application and then in Accounts add to the login items.
Using Automator you will be able to do many other things on startup as well.
Also take a look at this
http://www.seminars.apple.com/contactme/pdf/L334436B_ActiveDirect_WP.pdf
short but sweet.
I was hoping for some help and guidance. I've been a network engineer for 15 years now. All of my experience is in the Microsoft arena. Lately, my organization has been adopting MAC / Apple products ( iPad, iPhones, etc. ) but we've now gone as far as to purchase our first MAC desktop system, an iMAC.
Having no formal training in administering an iMAC in a Windows AD Domain ( 2008 ) I've been scouring the internet ( Google ) looking for as much information as I can. So far, I've been able to integrate it into our AD Domain and have network users login and have access to their network home directories.
I am, however, suffering in a couple of areas and was hoping that I could get some real world advice on the following:
1) What is the best way for me to administer this computer remotely using my Windows 7 Pro workstation? Example: Remotely connecting to it for help desk and other needs. Currently I use Dameware NT Utilities to remotely connect and administer my PC based workstations. Is there a similar utility for iMAC's that will run on Windows 7?
2) Login scripts... How am I able to accomplish this on a MAC? My PC based workstations use a batch file to map network drives and other things needed at login.
3) What is the best way for me to be able to control the iMAC through Group Policies? Or maybe I should be asking if this is even possible?
I appreciate in advance for any help your able to give! :)
2) Use Automator to create an application and have it run at login.
specifically to mount network drives use "get specified servers"
and add servers as smb://xxx.xxx.xxx.xxx/mountfolder add as many as you need.
Then use "Connect to servers"
Save as an application and then in Accounts add to the login items.
Using Automator you will be able to do many other things on startup as well.
Also take a look at this
http://www.seminars.apple.com/contactme/pdf/L334436B_ActiveDirect_WP.pdf
short but sweet.
more...
Hemingray
Oct 12, 11:22 PM
Originally posted by WanaPBnow
I'm gonna give it until the 3rd week of Oct is over, then I'll give up and just buy a used PB 667 to hold me over till the new stuff comes out. But I'll be darned if I pay $3200 for an 800mhz G4, I don't care how sexy it is.
Wouldn't you be KICKING yourself, though, if an 800MHz Ti was released the next week for the 667's price? :eek: That, to me, is definitely worth the wait. We know they're due any time now... why give in when they're so close?
I'm gonna give it until the 3rd week of Oct is over, then I'll give up and just buy a used PB 667 to hold me over till the new stuff comes out. But I'll be darned if I pay $3200 for an 800mhz G4, I don't care how sexy it is.
Wouldn't you be KICKING yourself, though, if an 800MHz Ti was released the next week for the 667's price? :eek: That, to me, is definitely worth the wait. We know they're due any time now... why give in when they're so close?
macdaddy121
Apr 7, 10:46 PM
You mean, like a garage? :rolleyes: :D
HAHAHAHAHA.....Very true.....good point ;)
HAHAHAHAHA.....Very true.....good point ;)
more...
butterfly0fdoom
Oct 27, 08:25 PM
At our store, they were yelling to the people in the hallway at about 7:00, "anyone want a free t-shirt?" So there was no need to buy one and the people at the store didn't seem to care about it, either.
Oh. The store I went to had a line that stretched nearly halfway across the mall, so they were pretty anal about making sure people actually in the line got in first.
Oh. The store I went to had a line that stretched nearly halfway across the mall, so they were pretty anal about making sure people actually in the line got in first.
Fender2112
Nov 15, 03:55 PM
Unless being mobile is a necessity, go with the G5 iMac. The extra horsepower will pay off. The 17" screen also comes in handy when you start adding tracks.
I don't know about the tech spec. You should be able to find this info on Apple's web site.
As for speakers. I use JBL Creatures and have been very pleased with them. They come in white and silver, both of which would compliment the iMac.
Good Luck
I don't know about the tech spec. You should be able to find this info on Apple's web site.
As for speakers. I use JBL Creatures and have been very pleased with them. They come in white and silver, both of which would compliment the iMac.
Good Luck
more...
jmdeegan
May 3, 10:21 AM
Have you tried all the best buys in Manhattan ?
Search JR Electronics (They have a few stores , and even one in macys herald square i believe) ? , ask if you can use prepaid debit cards ?
J and R only has one store, per se. It's departments are sometimes in seperate buildings, but it's really just one sprawling complex. It's apple section is on the 4th floor, not a ton of stuff there, I'd argue it's on par with the Apple section @ a typical best buy. Maybe a bit more stuff, but not significantly so.
Search JR Electronics (They have a few stores , and even one in macys herald square i believe) ? , ask if you can use prepaid debit cards ?
J and R only has one store, per se. It's departments are sometimes in seperate buildings, but it's really just one sprawling complex. It's apple section is on the 4th floor, not a ton of stuff there, I'd argue it's on par with the Apple section @ a typical best buy. Maybe a bit more stuff, but not significantly so.
ChrisA
Mar 15, 12:17 PM
...
So-getting back to my question...
more...
Sandals Outlet Sale. image
Sandals Outlet Sale. image
more...
saucy flat thong sandals.
Loop Strap Thong Sandals
Barros Thong Sandals
So-getting back to my question...
more...
Weaselboy
May 4, 10:48 AM
That's great news!
Did you get the OEM or Retail version? I'm ordering the OEM version, but I don't know if I'll be missing any screws or anything.
(I don't need the cables to clone my drive - I'm gonna migrate my data files using Time Machine.)
thanks,
nick
To intall in your MBP, the bare drive is all you need. There are four mounting nubby screws on the old drive you need to move to the new drive. Use a #6 Torx driver to remove them. Easy.
Did you get the OEM or Retail version? I'm ordering the OEM version, but I don't know if I'll be missing any screws or anything.
(I don't need the cables to clone my drive - I'm gonna migrate my data files using Time Machine.)
thanks,
nick
To intall in your MBP, the bare drive is all you need. There are four mounting nubby screws on the old drive you need to move to the new drive. Use a #6 Torx driver to remove them. Easy.
adcx64
Apr 20, 07:45 AM
Maybe the GPU just needs to be reflowed?
more...
scem0
Sep 28, 04:11 PM
I have decided to make a thread because I have exhausted all my means of club searching, I have yet to get bad advice from MR, and lots of good clubs try to stay underground.
I love to dance. I try to dance 4 times a week, but usually I only get 3 nights per week. Wednesdays are always annoying because I can't ever find a club to go to and I have no class on Thursday, so I can sleep in.
So if anyone here is familiar with clubs in New York City, please help me out:
I'm gay - so a gay club is preferable, but I'd be more than willing to go to a straight club if they have good music. Mixed clubs are a lot of fun too. A place like webster hall, which isn't mixed at all would be a last resort.
I'm a poor student - free is preferable, but I'd be willing to pay up to $15, depending on how much I feel like dancing (which is usually quite a bit :p).
I want to dance, not lounge! So no lounges or bars, please!
I'm only 18, so 21+ clubs aren't possible. I don't have a fake ID, I don't drink.
I'm in Manhattan, and I'm not so keen about riding the subway from too far away back to my dorm at 3-5AM after I'm done dancing. So, a club in Manhattan would be nice, near Union Square would be awesome. I like to walk to/from clubs to warm up/cool down my legs. :)
It really is driving me nuts staying pent up in my dorm on Wednesday nights, when I'm in a dancing mood, so you have no idea how much I'll love you if you can find me a good place to go dancing on Wed. nights.
Thanks :),
_Emerson
I love to dance. I try to dance 4 times a week, but usually I only get 3 nights per week. Wednesdays are always annoying because I can't ever find a club to go to and I have no class on Thursday, so I can sleep in.
So if anyone here is familiar with clubs in New York City, please help me out:
I'm gay - so a gay club is preferable, but I'd be more than willing to go to a straight club if they have good music. Mixed clubs are a lot of fun too. A place like webster hall, which isn't mixed at all would be a last resort.
I'm a poor student - free is preferable, but I'd be willing to pay up to $15, depending on how much I feel like dancing (which is usually quite a bit :p).
I want to dance, not lounge! So no lounges or bars, please!
I'm only 18, so 21+ clubs aren't possible. I don't have a fake ID, I don't drink.
I'm in Manhattan, and I'm not so keen about riding the subway from too far away back to my dorm at 3-5AM after I'm done dancing. So, a club in Manhattan would be nice, near Union Square would be awesome. I like to walk to/from clubs to warm up/cool down my legs. :)
It really is driving me nuts staying pent up in my dorm on Wednesday nights, when I'm in a dancing mood, so you have no idea how much I'll love you if you can find me a good place to go dancing on Wed. nights.
Thanks :),
_Emerson
ndraves
May 1, 08:34 AM
apple 5770 / 5870 supports xfire afaik.
I would very much like to implement this if they do. Do you have any info on this please? I couldn't find anything that suggested that anyone has it working with the Apple cards.
I would very much like to implement this if they do. Do you have any info on this please? I couldn't find anything that suggested that anyone has it working with the Apple cards.
nickculbertson
Apr 24, 08:39 AM
Hello,
Reacent Post
eyelikeart
Jul 7, 09:16 AM
yeah...I've been around for 2.5 years this month... :D
time flies, eh?
so jef...what are u going to do for your 3rd anniversary? ;)
time flies, eh?
so jef...what are u going to do for your 3rd anniversary? ;)
FireStar
Oct 9, 04:26 PM
Did anyone install it already?
I've received it 2 days ago but still have the stealth guard on my iPt which is going to be replaced in a week, so I will put the bse on the replacement-device.
Are those bse for a dry installation? I've received them in an envelope without a solution, just like the stealth guards.
No, you're supposed to make your own solution. I think it was a cup of water, and a 1/4 teaspoon of dish soap. Then put it in a spray bottle. This is probably why it's so cheap. It should have instructions on making the solution.
I've received it 2 days ago but still have the stealth guard on my iPt which is going to be replaced in a week, so I will put the bse on the replacement-device.
Are those bse for a dry installation? I've received them in an envelope without a solution, just like the stealth guards.
No, you're supposed to make your own solution. I think it was a cup of water, and a 1/4 teaspoon of dish soap. Then put it in a spray bottle. This is probably why it's so cheap. It should have instructions on making the solution.
jondob
May 4, 09:42 PM
I would contact Apple and they will replace the SuperDrive under AppleCare.
I don't really wanna go through all that hassle just for that...
The superdrive works fine and everything. Just a few times now it wouldnt bring the disk into the drive unless I restarted it..
I'd rather figure out the problem, I don't use the drive enough to be without my computer IF they even were to replace it.
I don't really wanna go through all that hassle just for that...
The superdrive works fine and everything. Just a few times now it wouldnt bring the disk into the drive unless I restarted it..
I'd rather figure out the problem, I don't use the drive enough to be without my computer IF they even were to replace it.
narco
Oct 2, 07:37 PM
Good. Aladdin reminds me of all the early Mac OS's like 8.5 and 9 for some reason. They definitely needed an update.
.narco
.narco
rdowns
Mar 28, 01:06 PM
just to clarify, i'm not asking for advice in if I should invest. I understand concerns that apple has hit an all time high, but I strongly believe it will only increase in the next year.
If anyone has any advice as to how I can do this that would be great.
Call your local discount broker's office- TD Ameritrade, eTrade and ask them if it's possible.
If anyone has any advice as to how I can do this that would be great.
Call your local discount broker's office- TD Ameritrade, eTrade and ask them if it's possible.
0 comments:
Post a Comment