macrumorsuser10
Apr 18, 12:09 AM
Or you could close the lid, put the Macbook Air flat on the table.
Simultaneously apply pressure from above on two diagonally opposite corners.
Repeat for the other corners.
Worked for me on the rev C.
Basically you are saying that the case is physically warped and that I should apply torque on the MBA case to fix the warp. That sounds a bit risky. I think I will bring this back.
Simultaneously apply pressure from above on two diagonally opposite corners.
Repeat for the other corners.
Worked for me on the rev C.
Basically you are saying that the case is physically warped and that I should apply torque on the MBA case to fix the warp. That sounds a bit risky. I think I will bring this back.
Hellhammer
May 6, 04:20 PM
How about 1080p movies in full screen mode? Does it look bad? Do you guys prefer watching it through a window at 1080p?
1080p, or even 720p should be fine. Moving picture is different because you don't concentrate in small details but try to read text in Safari at 1920x1080 and it will look pixel-ish, something that you don't want.
1080p, or even 720p should be fine. Moving picture is different because you don't concentrate in small details but try to read text in Safari at 1920x1080 and it will look pixel-ish, something that you don't want.
applemacdude
Apr 26, 04:22 PM
When u go mac u never go back;)
macbook123
Feb 20, 09:53 AM
I posted this question in an older thread but realized that the topic was somewhat different.
Here is my problem.
I am in the process of migrating my iPhoto pictures over to Aperture. Because I have close to 100k pictures and short clips, I can not import my entire 500 GB library at once because I don't have enough hard drive space to support both iPhoto and Aperture libraries at the same time. I also thought it might make sense to not have one gigantic library. Also I would like to have my old photos separated by years, and I don't know if Aperture would do this if I imported the entire iPhoto library (which does only separate them by events) at once. So it appears to me that the only import method that would work (please correct me if this is wrong) would be to open the "Masters" directory of iPhoto in the Finder, and drag and drop each year's directory into the "Projects/Library" panel in Aperture. Note that I do not want any editing information preserved from iPhoto, so using the Masters seems to be the most space efficient thing. So far so good but there appear to be at least two big snags. Firstly the yellow projects folders within each blue years folder in Aperture are not in chronological but in alphabetical order and I can't find out how to fix this. Secondly (and much more importantly) the dates on many old photos have been altered in an apparent random manner during the import into Aperture! Therefore they do appear in the wrong locations in my events library, according to the altered date. There are many too many photos that have been changed to undo this manually (I estimate it would take several weeks to do this).
But how and why could this have happened in the first place?
I also noticed that even when I change the dates of the Aperture masters to the true ones (by comparing to the masters in iPhoto), they still remain in the same wrong location in my Projects/Events library, according to the date originally (and falsely) assigned by Aperture.
There surely has to be a way to import photos into Aperture without ruining their date stamp?
Thanks in advance for your help!
Here is my problem.
I am in the process of migrating my iPhoto pictures over to Aperture. Because I have close to 100k pictures and short clips, I can not import my entire 500 GB library at once because I don't have enough hard drive space to support both iPhoto and Aperture libraries at the same time. I also thought it might make sense to not have one gigantic library. Also I would like to have my old photos separated by years, and I don't know if Aperture would do this if I imported the entire iPhoto library (which does only separate them by events) at once. So it appears to me that the only import method that would work (please correct me if this is wrong) would be to open the "Masters" directory of iPhoto in the Finder, and drag and drop each year's directory into the "Projects/Library" panel in Aperture. Note that I do not want any editing information preserved from iPhoto, so using the Masters seems to be the most space efficient thing. So far so good but there appear to be at least two big snags. Firstly the yellow projects folders within each blue years folder in Aperture are not in chronological but in alphabetical order and I can't find out how to fix this. Secondly (and much more importantly) the dates on many old photos have been altered in an apparent random manner during the import into Aperture! Therefore they do appear in the wrong locations in my events library, according to the altered date. There are many too many photos that have been changed to undo this manually (I estimate it would take several weeks to do this).
But how and why could this have happened in the first place?
I also noticed that even when I change the dates of the Aperture masters to the true ones (by comparing to the masters in iPhoto), they still remain in the same wrong location in my Projects/Events library, according to the date originally (and falsely) assigned by Aperture.
There surely has to be a way to import photos into Aperture without ruining their date stamp?
Thanks in advance for your help!
mojohanna
Jan 12, 06:54 PM
I think Macbook Air sounds kinda stupid. Macbook mini, macbook lite, macbook nano, macbook just about anything other than air.
What if Apple is launching something like its own nationwide wireless network (wifi, not cell), ties into .mac, iphone, itouch etc? Possibly the technology is easily rolled to other countries and that is part of the reason why the foreign press has been invited.
Pure speculation on my part. I have no "inside sources" or a deep throat.
What if Apple is launching something like its own nationwide wireless network (wifi, not cell), ties into .mac, iphone, itouch etc? Possibly the technology is easily rolled to other countries and that is part of the reason why the foreign press has been invited.
Pure speculation on my part. I have no "inside sources" or a deep throat.
lucascantor
Oct 18, 10:16 PM
I live right near the Ardmore store, so I'll be going there for the release, but I already ordered my copy online just to make sure I get it.
abhic
May 4, 02:08 PM
Awesome, thank you Macsavvytech!
Looking for more contributions people :) Write a little bit about why your MBP 2011 rocks (or not?).
Looking for more contributions people :) Write a little bit about why your MBP 2011 rocks (or not?).
jpod999
Mar 20, 01:43 PM
That looks pretty cool actually.
zedsdead
Mar 19, 06:06 AM
How does the Mac Mini handle itself when being used directly with a large TV?
I have a 1080p TV, 46" and plan to use it as a computer to show people how to use iPhoto and iMovie and such. I had my MacBook Air hooked up, and it worked fine as a second monitor but there was minor lag at times. When the Air was hooked up to my Apple 24" LED there is no lag at all so I was wondering if the screen size has anything to do with it.
Does the Mini handle this situation well? I am currently waiting for the refresh, but wanted some opinions in case this has been an issue or not.
I have a 1080p TV, 46" and plan to use it as a computer to show people how to use iPhoto and iMovie and such. I had my MacBook Air hooked up, and it worked fine as a second monitor but there was minor lag at times. When the Air was hooked up to my Apple 24" LED there is no lag at all so I was wondering if the screen size has anything to do with it.
Does the Mini handle this situation well? I am currently waiting for the refresh, but wanted some opinions in case this has been an issue or not.
Cyberheart
Mar 15, 06:03 AM
Make this thread alive people ! its fun :D
Night Spring
Mar 28, 12:02 PM
can run tiny umbrella on an ipad 2. I tried to save shsh blobs and nothing happens. I did this on my iphoen last month and it worked fine
Get the latest version of TinyUmbrella. It needs to be updated each time a new firmware is released.
Get the latest version of TinyUmbrella. It needs to be updated each time a new firmware is released.
Steve99
May 4, 01:40 PM
Excellent news! I think we can infer from this that Apple has nothing more then a skeleton crew working on 4.x at this point. I am sure all resources are hard at work on 5.x .
AHDuke99
Jun 6, 03:45 PM
lol, why no spymac :D
iccy :eek:
cause Spymac is hated around the Mac web
iccy :eek:
cause Spymac is hated around the Mac web
SLCentral
Mar 13, 02:10 PM
Bah, I just finished the extended hardware test, and after around 40 minutes, it finished with no errors. I'm back in OS X now, but I'm using my lappy for the time being, I'm gonna let it finish updating everything.
Also, I checked inside, and everything looks secure.
Also, I checked inside, and everything looks secure.
wickedG35
Jul 1, 09:37 PM
is this an ips panel or pva?
and would you be interested in a trade for a dell 2007wfp ips panel plus cash
the 20in in vertical next to a 30 looks really nice : )
I'm not sure, how can I tell?
and would you be interested in a trade for a dell 2007wfp ips panel plus cash
the 20in in vertical next to a 30 looks really nice : )
I'm not sure, how can I tell?
Nereus
Dec 17, 02:56 AM
On the Aluminium powerbooks the airport card is not user replacable part. It sounds like the antenna cable is not connected as other posters have said. This is a 10-15 minute fix and your local Apple store will probably do it as you wait.
To answer your earlier question, according to the apple service manual disconnecting the airport antenna is a required step when replacing a display since the airport antenna cable crosses over the top of the main display data cable.
Thanks mrichmon! I'll call Apple right away on Monday to have it fixed. :)
To answer your earlier question, according to the apple service manual disconnecting the airport antenna is a required step when replacing a display since the airport antenna cable crosses over the top of the main display data cable.
Thanks mrichmon! I'll call Apple right away on Monday to have it fixed. :)
Littleodie914
Mar 17, 06:19 PM
yeah something doesn't sound right here. can you tell us exactly what flags you used when starting folding?
are you using the console client?Sure, I'm running a shortcut of the SMP version:
.../FAH6.34-win32-SMP.exe -smp -bigadv
FahMon apparently pulled itself together, and is now reporting a more reasonable 8955 points for this protein. The deadline is still the same though.
Here's my console output:
[01:06:40] + Downloading new core: FahCore_a5.exe
[01:06:41] + 10240 bytes downloaded
...yadda yadda...
[01:06:49] + 2711739 bytes downloaded
[01:06:49] Verifying core Core_a5.fah...
[01:06:49] Signature is VALID
[01:06:49]
[01:06:49] Trying to unzip core FahCore_a5.exe
[01:06:50] Decompressed FahCore_a5.exe (9326080 bytes) successfully
[01:06:55] + Core successfully engaged
[01:07:00]
[01:07:00] + Processing work unit
[01:07:00] Core required: FahCore_a5.exe
[01:07:00] Core found.
[01:07:00] Working on queue slot 01 [March 18 01:07:00 UTC]
[01:07:00] + Working ...
[01:07:00]
[01:07:00] *------------------------------*
[01:07:00] Folding@Home Gromacs SMP Core
[01:07:00] Version 2.27 (Mar 12, 2010)
[01:07:00]
[01:07:00] Preparing to commence simulation
[01:07:00] - Looking at optimizations...
[01:07:00] - Created dyn
[01:07:00] - Files status OK
[01:07:06] - Expanded 24864068 -> 30796292 (decompressed 123.8 percent)
[01:07:06] Called DecompressByteArray: compressed_data_size=24864068 data_size=3
0796292, decompressed_data_size=30796292 diff=0
[01:07:06] - Digital signature verified
[01:07:06]
[01:07:06] Project: 6901 (Run 21, Clone 10, Gen 6)
[01:07:06]
[01:07:07] Assembly optimizations on if available.
[01:07:07] Entering M.D.
[01:07:13] Mapping NT from 8 to 8
[01:07:17] Completed 0 out of 250000 steps (0%)
[02:22:51] Completed 2500 out of 250000 steps (1%)
are you using the console client?Sure, I'm running a shortcut of the SMP version:
.../FAH6.34-win32-SMP.exe -smp -bigadv
FahMon apparently pulled itself together, and is now reporting a more reasonable 8955 points for this protein. The deadline is still the same though.
Here's my console output:
[01:06:40] + Downloading new core: FahCore_a5.exe
[01:06:41] + 10240 bytes downloaded
...yadda yadda...
[01:06:49] + 2711739 bytes downloaded
[01:06:49] Verifying core Core_a5.fah...
[01:06:49] Signature is VALID
[01:06:49]
[01:06:49] Trying to unzip core FahCore_a5.exe
[01:06:50] Decompressed FahCore_a5.exe (9326080 bytes) successfully
[01:06:55] + Core successfully engaged
[01:07:00]
[01:07:00] + Processing work unit
[01:07:00] Core required: FahCore_a5.exe
[01:07:00] Core found.
[01:07:00] Working on queue slot 01 [March 18 01:07:00 UTC]
[01:07:00] + Working ...
[01:07:00]
[01:07:00] *------------------------------*
[01:07:00] Folding@Home Gromacs SMP Core
[01:07:00] Version 2.27 (Mar 12, 2010)
[01:07:00]
[01:07:00] Preparing to commence simulation
[01:07:00] - Looking at optimizations...
[01:07:00] - Created dyn
[01:07:00] - Files status OK
[01:07:06] - Expanded 24864068 -> 30796292 (decompressed 123.8 percent)
[01:07:06] Called DecompressByteArray: compressed_data_size=24864068 data_size=3
0796292, decompressed_data_size=30796292 diff=0
[01:07:06] - Digital signature verified
[01:07:06]
[01:07:06] Project: 6901 (Run 21, Clone 10, Gen 6)
[01:07:06]
[01:07:07] Assembly optimizations on if available.
[01:07:07] Entering M.D.
[01:07:13] Mapping NT from 8 to 8
[01:07:17] Completed 0 out of 250000 steps (0%)
[02:22:51] Completed 2500 out of 250000 steps (1%)
macingman
May 1, 02:58 AM
If you have a screen protecter it could be dirt under the screen protecter.
alukado
Apr 29, 12:58 AM
I bought this via slickgate (http://www.slickgate.com/gevey-turbo-sim-unlock-for-iphone-4-ios-41-42-43_p990.html) for $10 and it worked perfectly on my ip4 with baseband 03.10.
Just pop in the sim w/gevey and then wait for it to load up, it gives you the instructions on the screen, hit accept, dail 112 wait till the screen changes and then count to 3 after that hang up and turn on airplane mode and wait till it says no SIM (pop up) and then turn off airplane mode, you get a few more pop ups and then bham its unlocked until you restart
Just pop in the sim w/gevey and then wait for it to load up, it gives you the instructions on the screen, hit accept, dail 112 wait till the screen changes and then count to 3 after that hang up and turn on airplane mode and wait till it says no SIM (pop up) and then turn off airplane mode, you get a few more pop ups and then bham its unlocked until you restart
mabcan
Oct 8, 03:39 AM
My MacBookPro 2,4 Ghz 15' Santa Rosa doesn't start. Every time I try to start the computer it just says that I need to restart and it goes on and on with the same message.
The monitor has stripes of red/purple over a purple blueish background. And all this happens 2,5 years after buying it. I would like to know if this repair program will be extended to Portugal, when the claim will be won after December 2010.
I do hope so and Apple must be aware of the quality of the parts she is buying for their computers.
It's the second time I have this problem in 4 years with 2 different computers, although the first time the motherboard was replaced within the warranty time.
The monitor has stripes of red/purple over a purple blueish background. And all this happens 2,5 years after buying it. I would like to know if this repair program will be extended to Portugal, when the claim will be won after December 2010.
I do hope so and Apple must be aware of the quality of the parts she is buying for their computers.
It's the second time I have this problem in 4 years with 2 different computers, although the first time the motherboard was replaced within the warranty time.
lionheartednyhc
Aug 12, 02:14 AM
Great post! It's very nice. Thank you so much for your post.
Trying to bump up your post count? :confused:
Trying to bump up your post count? :confused:
nlivo
Jan 14, 07:37 PM
macworld is more exciting for me but that's only because the websites fuel the excitement. With Christmas there is nothing that builds the hype for you.
marlomarizza
May 6, 01:38 PM
My displays are set at 1920x1200 � is this right? is there another resolution setting somewhere?
xxBURT0Nxx
May 5, 10:14 AM
I removed my Samsung 470 SSD from an HP laptop that had Win 7 running. Trim was enabled automatically with Win 7. When I put it into my new Macbook Pro trim was not enabled. You can check by going into the Apple, then About, then More Info and finally into Serial ATA. When you scroll down you will see that trim is not enabled.( Without it, the SSD will fill up and slow down. Google it and see what it does). Groths.org had a Trim Enabler patch that worked perfectly. I downloaded it and clicked on it and it installed. When I went back into the Apple, etc I found that trim had been enabled. Kudos to Oskar. I dropped a couple of bucks on him from Paypal because I appreciate this kind of work. Maybe Apple will have trim enabled in the next OS, like Win7.
trim is only supported on SSD's that you buy from apple, and only recently.
As the other poster said, there haven't been problems with people running 3rd party SSD's w/o trim enabled. In fact some users have reported problems with their drives after enabling trim support.
If you really feel you must have it, search the boards, there is a tutorial here on how to enable it through some simple command lines.
trim is only supported on SSD's that you buy from apple, and only recently.
As the other poster said, there haven't been problems with people running 3rd party SSD's w/o trim enabled. In fact some users have reported problems with their drives after enabling trim support.
If you really feel you must have it, search the boards, there is a tutorial here on how to enable it through some simple command lines.
0 comments:
Post a Comment